Journal Papers 2017

  1. Ahn I. H., Seung K. M., Hwang J. H. & Bi G., “Characteristic length of the solidified melt pool in selective laser melting process”, Rapid Prototyping Journal, 23(2), 370-381, 2017
  2. Amelia L.Y.L, An J., Chua C.K., "Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials", Engineering, 3(5), 663-674, 2017
  3. Aphinyan S., Geethalakshmi K.R., Yeo J.J., Shakouri A. and Ng T.Y., “Numerical characterization of ultraviolet ink fluid agglomeration and the surfactant effect in nanoinkjet printing”, Polymers for Advanced Technologies, 28 (9), 1057-1064, 2017
  4. Bastola A.K., Hoang V.T. & Li L., “A novel hybrid magnetorheological elastomer developed by 3D printing”, Materials & Design, 114, 391–397, 2017
  5. Chua C.K., Zhou K., Wei J., Bai J.M., Yuan S.Q., Shen F., Zhang B.C., “Toughening of polyamide 11 with carbon nanotubes for additive manufacturing”, Virtual and Physical Prototyping, 12(3), 235-240, 2017
  6. Chua Z.Y., Ahn I. H. & Seung K. M., “Process monitoring and inspection systems in metal additive manufacturing: status and applications,” International Journal of Precision Engineering and Manufacturing-Green Technology, 4(2), 235-245, 2017
  7. Eng H., Maleksaeedi S., Yu S., Choong Y. Y. C., Wiria F. E., Kheng R., Wei J., Su P. C. & Tham H. J., "Development of CNTs-filled photopolymer for projection stereolithography", Rapid Prototyping Journal, 23(1), 129-136, 2017
  8. Gan M. X. & Wong C. H., "Properties of selective laser melted spodumene glass-ceramic", Journal of the European Ceramic Society, 37(13), 3823–4240, 2017
  9. Goh G.L., Agarwala S., Goh G.D., et al. "Additively manufactured multi-material free-form structure with printed electronics," The International Journal of Advanced Manufacturing Technology, 1-8, 2017
  10. Goh G. D., Agarwala S., Goh G. L., V. Dikshit, S.L. Sing & Yeong W. Y., "Additive manufacturing in unmanned aerial vehicles (UAVs): challenges and potential", Aerospace Science and Technology, 63, 140-151, 2017 
  11. Ho C. M. B., Mishra A., Lin P. T. P., Ng S. H., Yeong W. Y., Kim Y. J. & Yoon Y. J., "3D printed polycaprolactone carbon nanotube composite scaffolds for cardiac tissue engineering", Macromolecular Bioscience, 17(4), 1600250, 2017
  12. Lee H., Lim C. H. J. , Low M. J. , Tham N. , Matham M. V. and Kim Y. J. , “Lasers in additive manufacturing: A review,” International Journal of Precision Engineering and Manufacturing-Green Technology, 4(3), 307-322, 2017
  13. Lee, J.Y., An, J., Chua, C.K., “Fundamentals and applications of 3D printing for novel materials”, Applied Materials Today, 7, 120-133, 2017
  14. Li H., Tan Y. J., Leong K. F. & Li Lin, "3D bioprinting of highly thixotropic alginate/methylcellulose hydrogel with strong interface bonding", ACS Applied Materials & Interfaces, 9(23), 20086-20097, 2017
  15. Li Y., Zhou K., Tor S. B., Chua C. K. & Leong K. F., "Heat transfer and phase transition in the selective laser melting process", International Journal of Heat and Mass Transfer, 108, 2408-2416, 2017
  16. Lu Q. Y. and Wong C. H., "Additive manufacturing process monitoring and control by non-destructive testing techniques: challenges and in-process monitoring", Virtual and Physical Prototyping, 1-10, 2017Measurement of tensile bond strength of 3D printed geopolymer mortar
  17. Lu Q. Y. and Wong C. H., "Applications of non-destructive testing techniques for post-process control of additively manufactured parts," Virtual and Physical Prototyping, 12(4), 301-321, 2017
  18. Mogali SR, Yeong WY, Tan HKJ, Tan GJS, Abrahams PH, Zary N, Low-Beer N, Ferenczi MA, "Evaluation by medical students of the educational value of multi-material and multi-colored three dimensional (3D) printed model of the upper limb for anatomical education", Anatomical Sciences Education, Accepted, 2017
  19. Mohit M., Erdal K., “Receding horizon control of a 3 DOF helicopter using online estimation of aerodynamic parameters”, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 1-12, Accepted, 2017
  20. Ng W. L., Lee J. M., Yeong W. Y., and May W. N., "Microvalve-based bioprinting–process, bio-inks and applications", Biomaterials Science, 4, 632-647, 2017
  21. Ng W. L., Yeong W. Y., and May W. N., "Polyvinylpyrrolidone-based bio-ink improves cell viability and homogeneity during drop-on-demand printing", Materials (Basel), 10(2), 190, 2017
  22. Panda B., Paul S.C., Hui L.J., Tay Y.W.D., Tan M.J, “Additive manufacturing of geopolymer for sustainable built environment”, Journal of Cleaner Production, 167, 281–288, 2017
  23. Panda B., Paul S.C., Tan M.J., “Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material”, Materials Letters, 209, 146–149, 2017
  24. Paul S.C., Van Z.J., G.P.A.G., Tan M.J., Gibson I., “A review on 3D concrete printing systems and materials properties: Current Status and Future Research Prospects”, Rapid Prototyping Journal, 2017
  25. Pham H. and Pham Q.C., “Robotic manipulation of a rotating chain,” IEEE Trans. Robot., Apr. 2017
  26. Pham M. T., Teo T. J.  & Yeo S. H., "Synthesis of multiple degrees-of-freedom spatial-motion compliant parallel mechanisms with desired stiffness and dynamics characteristics", Precision Engineering, 47, 131-139, 2017
  27. Pham M.T., Teo T.J., Yeo S.H., Wang P., Nai M.L.S., “A 3d-printed ti-6al-4v 3-dof compliant parallel mechanism for high precision manipulation”, IEEE/ASME Transactions on Mechatronics, 22(5), 2359–2368, 2017
  28. Saengchairat, N., Tran, T., & Chua, C. K., “A review: Additive manufacturing for active electronic components”, Virtual and Physical Prototyping, 12(1), 31-46, 2017
  29. Sing S. L., Yeong W. Y., Wiria E. F., Tay B. Y., Zhao Z., Zhao L., Tian Z. & Yang S., "Direct selective laser sintering and melting of ceramics: a review", Rapid Prototyping Journal, 23(3), 611-623, 2017
  30. Suntornnond R., An J. & Chua C. K., "Bioprinting of thermo-responsive hydrogels for next generation tissue engineering: A review", Macromolecular Materials and Engineering, 302(1), 1600266, 2017
  31. Suntornnond, R., An J., & Chua C.K., “Roles of support materials in 3D bioprinting–present and future”, International Journal of Bioprinting, 3(1), 83-86, 2017
  32. Jang T.S., Jung H.D., Houwen M. P., Chen S.Y. & Song J.H. "3D printing of hydrogel composite systems: Recent advances in technology for tissue engineering", 4(1), 1-28, International Journal of Bioprinting, 2017
  33. Tan X., Tan Y. J., Shi L. C. C., Tor S. B. & Yeong W. Y., "Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: A state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility", Materials Science & Engineering C., 76, 1328–1343, 2017
  34. Tay Y.W.D., Panda B., Paul S.C., Nisar A. N. M., Tan M.J., and Leong K.F., “3D printing trends in building and construction industry: a review”, Virtual and Physical Prototyping, 12(3), 261-276, 2017
  35. Tran V.T., Wei, Y., Liau W., Yang H., Du H., “Preparing of Interdigitated Microelectrode Arrays for AC Electrokinetic Devices Using Inkjet Printing of Silver Nanoparticles Ink”, Micromachines, 8(4), 106, 2017
  36. Tran V.T., Yue F. W., Hong Y. Y., Zhao Y. Z., He J.D., “All-inkjet-printed flexible ZnO micro photodetector for a wearable UV monitoring device”, Nanotechnology, 28 (9), 095204, 2017
  37. Teoh J. E. M., An J., Chua C. K., Lv M., Krishnasamy V., & Liu Y., “Hierarchically self-morphing structure through 4D printing”, Virtual and Physical Prototyping, 12(1), 61-68, 2017
  38. Teoh J. E. M., Chua C. K., Liu Y. & An, J., “4D printing of customised smart sunshade: A conceptual study”, In Challenges for Technology Innovation: An Agenda for the Future, CRC Press, 105-108, 2017
  39. Teoh J.E.M., et al., “Multi-stage responsive 4D printed smart structure through varying geometric thickness of shape memory polymer”, Smart Materials and Structures, 26(12), 125001, 2017
  40. Tian X., Jun J., Yuan S., Chua C. K., Tor S. B. & Zhou K., "Emerging 3D-printed electrochemical energy storage devices: a critical review", Advanced Energy Materials, 7(17), 1700127, 2017
  41. Vishwesh D., Nagalingam A.P., Yap Y. L., Sing S. L., Yeong W. Y. & Jun W., "Investigation of quasi-static indentation response of inkjet printed sandwich structures under various indenter geometries", Materials (Basel), 10(3), 290, 2017
  42. W. S. Tan, Stanislaus R. S., An J., Chua C.K., Anthony G. Fane, Tzyy Haur Chong, “Comparison of solid, liquid and powder forms of 3D printing techniques in membrane spacer fabrication”, Journal of Membrane Science, 537, 283-296, Accepted, 2017
  43. Wei J., Choong Y.Y.C., Maleksaeedi S., Eng H., Su P.C., “4D Printing of High Performance Shape Memory Polymer using Stereolithography”, Materials and Design, 2017
  44. Yao X., Seung K. M. & Bi G., “A hybrid machine learning approach for additive manufacturing design feature recommendation,” Rapid Prototyping Journal, 23(6), 2017
  45. Yao X., Seung K. M. & Bi G., “Multidisciplinary design optimization to identify additive manufacturing resources in customized product development,” Journal of Computational Design and Engineering, 4(2), 131–142, 2017
  46. Yap Y. L., Tan Y. S. E., Tan H. K. J., Peh Z. K., Low X. Y., Yeong W. Y., Tan S. H. C. & Laude A., "3D printed bio-models for medical applications", Rapid Prototyping Journal, 23(2), 227-235, 2017
  47. Yuan S., Shen F., Bai J., Chua C. K., Wei J. & Zhou K., "3D soft auxetic lattice structures fabricated by selective laser sintering: TPU powder evaluation and process optimization", Materials & Design, 120, 317-327, 2017
  48. Zhang M., Sun C.N., Zhang X., Goh P.C., Wei J., Hardacre D., Li H., “Elucidating the relations between monotonic and fatigue properties of laser powder bed fusion stainless steel 316L”, The Journal of The Minerals, Metals & Materials Society, 68(799), 2017
  49. Zhang M., Sun C.N., Zhang X., Goh P.C., Wei J., Hardacre D., Li H., “Fatigue and fracture behaviour of laser powder bed fusion stainless steel 316L: Influence of processing parameters”, Materials Science and Engineering, A 703, 251-261, 2017