Conference Papers 2016

  1. Agarwala S. & Yeong W. Y., "3D Printed Electronic Tracks for Bio-integrated Freeform Devices", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16-19 May 2016.
  2. Anwar B. A. & Pham Q. C., "Effect of inert gas flow velocity and unidirectional scanning on the formation and accumulation of spattered powder during selective laser melting", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  3. Aphinyan S., Geethalakshmi K. R., Yeo J. & Ng T. Y., "Dissipative particle dynamics study of ultraviolet ink agglomeration in 3d inkjet printing", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  4. Chandra S. P., Gandham P., Tan X., Seet G. L., Tor S. B. & Chua C. K. "Multi-scale modeling of Additive Manufacturing process", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 -19 May 2016.
  5. Choong Y. Y. C., Saeed M., Eng H. & Su P. C., "Curing behaviour and characteristics of shape memory polymers by UV based 3d printing", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  6. Choong Y.Y.C., Saeed M., Eng H., Su P. C. & Wei J., "Exploring Variability in Shape Memory Properties of Stereolithography Printed Parts", 2016 Annual International Solid Freeform Fabrication Symposium, USA, 8 – 10 August 2016.
  7. Chua Z. Y., Ahn I. H. & Moon S. K., "Geometric influence in selective laser melted Ti6Al4V alloy", 18th International Conference on Industrial Engineering (IJIE2016), South Korea, 10 - 12 October 2016.
  8. Dikshit V., Yap Y. L., Goh G. D., Yang H., Lim J. C., Qi X., Yeong W. Y. & Wei J., "Investigation of out of plane compressive strength of 3D printed sandwich composites", IOP Conference Series: Materials Science and Engineering, Indonesia, 26 – 27 October 2016.
  9. Dikshit V., Prasanth N. A., Kumar J. D., Yap Y. L., Agarwala S. & Yeong W. Y., "Out Of Plane Compressive Strength Of 3D Printed Vertical Pillared Corrugated Core Structure", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May ​2016.
  10. Dikshit V., Prasanth N. A., Kumar J. D., Yap Y. L. & Yeong W. Y., "Investigation Of Quasi Static Indentation On 3D Printed Honeycomb Based Truncated-pyramid Square Structure", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 ​May 2016.
  11. Du Z., Tan M., Guo J. F., Chua C. K. & Lim J. J. D., "The effect of laser power and scanning speed on the density of selective laser melting fabricated AL-CNT composites", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  12. Gan M. X. & Wong C. H., "Effect of hatch spacing on the density of selectively laser melted spodumene", 6th International Congress on Ceramics, Germany, 21 - 25 August 2016.
  13. Gan M. X. & Wong C. H., "Selective laser melting of spodumene: an exploratory study", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 May 2016 – 19 May 2016.
  14. Gideon P.A.G., Zijl V., Paul S.C. & Tan M. J., "Properties of 3D Printable Concrete", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16-19 May 2016.
  15. Goh G. D. & Yeong W. Y., "3d printed materials for high torque applications: challenges and potential", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  16. Goh G. L., Agarwala S. & Yeong W. Y., "3d printing of microfludic sensor for soft robots: a preliminary study in design and fabrication", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  17. Govdeli Y., Wong Z. W. & Kayacan E., "Additive Manufacturing of Unmanned Aerial Vehicles: Current Status, Recent Advances and Future Perspectives", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 -19 May 2016.
  18. Ho J. Y., Wong K. K., Leong K. C. & Yang C., "Enhanced nucleate pool boiling from microstructured surfaces fabricated by Selective Laser Melting", ASME 2016 5th International Conference on Micro/Nanoscale Heat and Mass Transfer, Singapore, 4 - 6 January 2016. 
  19. Jing W., Tan X. P., Liu E., Tor S. B. & Chua C. K., “Effects of speed function and focus offset on selective electron beam melting of stainless steel 316L”, 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16-19 May 2016.​
  20.  Keane P., Chua C. K. & Sunil C. J., "Embedding Electronics in Printing Ultem 9085 Quadcopter", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 -19 May 2016.
  21.  Khairyanto A., Wu A., Nguyen W.L. & Seet G. L., "Evaluation of 3D Scanner Using Elimination and Multi Criteria Decision Making (MCDM) Method", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  22. Khoo Z. X., Ong C., Liu Y., Chua C. K., Leong K. F. & Yang S. F., "Selective laser melting of nickel titanium shape memory alloy", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  23.  Ko H., Enea S., Chua Z. Y., Moon S. K. & Otto N. K., "User-centered design for additive manufacturing as a customization strategy", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  24. Ko H., Moon S. K., Wood K. L. & Oh H. S., "An Integration of Function- and Affordancebased Methods for Product-service System Utilizing Finite State Automata", 9th IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Indonesia, 4 - 7 December 2016.
  25. Kok Y., Tan X., Loh N. H., Tor S. B. & Chua C. K., "Geometrical-based characterisation of complex ti-6al-4v parts fabricated by selective electron beam melting", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  26. Lee J. M. & Yeong W. Y., "Bioprinting for Cardiovascular Tissue Engineering", 2nd International Conference on Pro-AM Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  27. Lee J. Y., An J., Chua C. K., Fane G. A. & Chong T. H., "A perspective on 3d printed membrane: direct/indirect fabrication methods via direct laser writing", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  28. Lee T. H., Su P. C. & Wiria E. F., "Fabrication of samaria doped ceria thin film on porous substrate by slurry spin coating", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  29. Lee T. H., Su P. C. & Wiria E. F., "Improvement in Thermo-Mechanical Stability of Porous Silver Cathode by Infiltrating Samarium Doped Ceria Nanoparticles", 8th International Conference On Technological Advances Of Thin Films and Surface Coatings, Singapore, 12 - 15 July 2016.
  30. Leong K. C. & Wong K. K., "Enhanced flow boiling heat transfer using 3D structures fabricated by selective laser melting", International Heat Transfer Symposium 2016, IHT2016, UK, 27 -29 June 2016.
  31. Liew W. L. A. & Zhang Y., "Fabrication of lumenized vascular tubes for tissue engineering applications", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  32. Lu B., Tan M. & Qian S., "A review of 3d printable construction materials and applications", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  33. Mohit M., Kayacan E. & Kumbasar T., "Design and Experimental Validation of Single Input Type-2 Fuzzy PID Controllers as Applied to 3 DOF Helicopter Testbed", IEEE International Conference on Fuzzy Systems –FUZZ 2016 , Canada, 24 – 29 July 2016.
  34. Mohit M., Prach A. & Kayacan E., "Numerical Investigation of Gaussian Filters with a Combined Type Bayesian Filter for NonlinearState Estimation", NOLCOS 2016: 10th IFAC Symposium on Nonlinear Control Systems, USA, 23 - 25 August 2016.
  35. Ng W. L., Yeong W. Y. & Naing M. W., "Development of Polyelectrolyte Chitosan-gelatin Hydrogels for Skin Bioprinting", Procedia CIRP, 49, 105-112, 2016.
  36. Ng W. L., Yeong W. Y. & Naing W. M., "Microvalve bioprinting of cellular droplets with high resolution and consistency", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  37. Nitipon S., "Additive Manufacturing for Active Electronic Components: A Review", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  38. Panda B., Tan M. J., Gibson I. &  Chua C. K., "The Disruptive Evolution of 3D Printing", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16-19 May 2016.
  39. Panda B., Tay Y. W., Chandra S. P., Tan M. J., Leong K. F., Gibson I., Chua C. K., Yeong W. Y. & Liu E. "Current Challenges and Future Perspectives of 3D Concrete Printing", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  40. Pham T. H., Lim J. H. & Pham Q. C., "Robotic 3d-printing for building and construction", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  41. Pham M. T., Teo T. J. & Yeo S. H., "Investigation of the mechanical properties of 3D printed compliant mechanisms", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  42. Rinoj G., Idapalapati S. & Fieh S., "Failure mode analysis of Kagome lattice structures", 2nd International Conference On Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  43. Seung K. M., Tan Y. E., Ko H., Chua Z. Y., Ngo T. H., Hwang J. H. & Baek. J. W., "A Customized 3D Printed Sensor Development Framework for Component Condition Monitoring", The 18th International Conference on Industrial Engineering (IJIE2016), South Korea, 10 -12 October 2016.
  44. Shukri B. A. J., Chou S. M. & Tai K., "Controlling polymer digital material composition with layering", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  45. Sing S. L., Wiria E. F. & Yeong W. Y., "Characterisation of micro-lattices fabricated by selective laser melting", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  46. Sriphutkiat Y. & Zhou Y., "Particle accumulation in microchannel and its reduction by surface acoustic wave (saw)", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  47. Suntornnond R., An J. & Chua C. K., "A preliminary study on the extrusion resolution of pluronic F127 for bioprinting thermo-responsive hydrogel constructs", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  48. Tan H. W., Tuan T. & Chua C. K., "A study of the state-of-the-art printed passive electronic components through fully additive manufacturing methods", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  49. Tan H. W., Tuan T. & Chua C. K., "Aerosol Jet Printed Strain Gauge", The 18th International Conference on Industrial Engineering (IJIE 2016), South Korea, 2016.
  50. Tan J. L. & Wong C. H., "Multiple materials using selective laser melting", 6th International Conference on Ceramics, Germany, 21 - 25 August 2016.
  51. Tan J. L. & Wong C. H., "Review of multi-material additive manufacturing", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  52. Tan K. H. Y., Su P. C., Sun C. N. & Jun W., "Effects of laser processing on nickel oxide – yttria stabilized zirconia", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  53. Tan P., Li Y. & Zhou K., "Finite element analysis of temperature field in selective laser melting process", 2nd
  54. Tan W. S., An J., Chua C. K., Fane G. A. & Chong T. H., "3D Printed Feed Spacers For Spiral Wound Membrane Modules –Enhancement Of Mass Transfer", Rome 2016 Desalination for the Environment: Clean Water and Energy, Italy, 22 - 26 May 2016.
  55. Tan W. S., Chua C. K., Chong T. H., Fane G. A. & An J., "Selective laser sintering of polypropylene feed spacers for spiral wound membrane modules", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  56. Tan Y. J., Chian K. S. & Leong K. F., "Fabricating patient-customizable tubular scaffolds from biodegradable polymer", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  57. Tan Y. S. E. & Yeong W. Y., "Fabrication of complex hydrogel structure via free-form bioprinting: a review", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016. ​
  58.  Teoh E. M. J., Chua C. K., Liu Y. & An J., "4D printing of customized smart sunshade: a conceptual study", International Conference on Sustainable Smart Manufacturing (S2M), Portugal, 20 -22 Oct 2016.
  59.  Teoh E. M. J., Chua C. K., Liu Y., An J. & Li Y., "Preliminary investigation of 4d printing technology for deployable UAV development", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  60. Tey C. F., Yeong W. Y. & Chen S., "Selective laser melting of copper based alloy on steel: a preliminary study", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  61. Toh W. Q., Sun Z., Tan X., Liu E., Tor S. B. & Chua C. K., "Comparative study on tribological behavior of Ti-6A1-4V and Co-Cr-Mo samples additively manufactured with electron beam melting", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  62. Tran V. T., Yang H., Wei Y. & Du H., "Additive manufacturing of ZnO thin film for micro size UV photodetector", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 -19 May 2016.
  63. Vo X. Q. & Tuan T., "Transient electrowetting on dielectric for activating droplets in bioprinting applications", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  64. Wang J., Liu E., Tor S. B. & Chua C. K., "Metal 3d printing via selective laser melting and direct metal deposition: materials, properties and applications", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  65. Wang P., Nai M. L. S., Tan X., Wai S. J., Tor S. B., Jun W., "Anisotropic mechanical properties in a big-sized Ti-6Al-4V plate fabricated by electron beam melting", TMS2016 conference, USA, 14 - 18 February 2016.​
  66. Wang P., Nai M.L.S., Tan  X.P., et al. Recent Progress of Additive Manufactured Ti-6Al-4V by Electron Beam Melting. Solid Freeform Fabrication, Proceedings of the 26th Annual International Solid Freeform Fabrication Symposium, pp. 691-704, 2016 
  67. Wang S., Sing S. L., Agarwala S. & Yeong W. Y., "Fabrication of titanium lattice structures by selective laser melting for osteochondral tissue regeneration", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016
  68.  Weng Y., Lu B., Tan M. & Qian S., "Rheology and printability of engineered cementitious composites-a literature review", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  69.  Wong C. H., “Additive manufacturing: a panacea?,” 2nd International Conference on Mechanical and Aeronautical Engineering, Hong Kong, 28-30 December 2016.
  70. Wong C. H., “Adoption and challenges of additive manufacturing technologies,” 6th International Congress on Ceramics, Germany, 21-25 August 2016.​
  71. Wong K. K., Ho J. Y., Leong K. C. & Wong T. N., "Convective heat transfer performance of staggered heat sink arrays fabricated by Selective Laser Melting", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 -19 May 2016.
  72. Wong K. K. & Leong K. C., "Pool boiling enhancement of porous structures fabricated by selective laser melting", International Heat Transfer Symposium 2016, IHT2016, UK, 27 - 29 June 2016.
  73. Wu W., Tor S. B., Leong K. F., Chua C. K. & Aziz A. M., "State of the art review on selective laser melting of stainless steel for future applications in the marine industry," 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  74. Xu F. & Chen S., "Topology optimization and structure partition for additive manufacturing: a literature review," 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  75.  Yao X., Seung K. M. & Bi G., "Multidisciplinary design optimization for additive manufactured customized products," 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  76.  Yap C. Y., Chua C. K. & Dong Z., "Preliminary investigation on selective laser melting of pure tin," 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  77.  Yap Y. L., Dikshit V., Lionar S. P., Yang H., Lim J. C., Qi X., Yeong W. Y. & Wei J., "Investigation of fiber reinforced composite using multi-material 3D printing", International Solid Freeform Fabrication Symposium, USA, 2016.
  78.  Yap Y. L., Wang C., Tan H. K. J., Dikshit V. & Yeong W. Y., "Benchmarking of material jetting process: process capability study," 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  79.  Yuan S., Bai J., Chow W., Chua C.K., Wei J. and Zhou K., Characterization of creeping and shape memory effect in laser sintered thermoplastic polyurethane, The 18th International Conference on Innovative Design and Manufacturing, New Zealand, January 24-26, 2016. 
  80. Yuan S., Chua C. K., Zhou K., Bai J. & Jun W., "Dynamic mechanical behaviors of laser sintered polyurethane incorporated with mwcnts," 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.
  81. Zhang M., Li H., Zhang X. & Hume D., "Review of the fatigue performance of stainless steel 316l parts manufactured by selective laser melting", 2nd International Conference on Progress in Additive Manufacturing, Singapore, 16 - 19 May 2016.